Nothing bothers more than a malfunctioning printer. A malfunctioning printer if not treated properly will always create problem. It is better to get in touch with technical support resources to have your printer fixed as soon as possible. These specialists are committed to providing you with solutions to your printer-related technical issues. 

However, if the technician is unavailable, you can take care of your printer. Certain minor problems can be identified easily and cured. We have gathered some of the common errors in HP printers that can be corrected at home with few changes –

Faded prints 

A faded print is due to one of three factors: 

• The printer is out of toner.
• The print density is too low.
• Economode printing is enabled. 

A printer self-test can reveal what the current settings are for the last two settings. If Economode is on and users complain about how light the print is, turn it off and/or increase the print density. Just remove the cartridge and shake it for the toner to redistribute when it is running low. This will temporarily solve your problem till you replace the toner cartridge. 

Finally, if the printer is out of toner, then buy a new toner cartridge from Need More Ink. They provide the best deals on HP ink and another cartridge. They have enough supplies for a large corporation, a small business, or someone who desperately needs an ink cartridge for their home printer. They have exceptional customer service, premium quality products at needmoreink.com, and provide fast delivery anywhere in the USA.  

50.4 Error Message

On some of the newer HP LaserJet printers, a 50.4 error indicates a problem with the capacity to provide. If your printing device is connected to a power strip or UPS, then disconnect it and directly re-plug it into a wall outlet. A UPS should never be connected to a laser printer because the surges of electricity required by the printer to keep the fuser assembly warm will damage the UPS. If it doesn’t work, make sure that all the printer’s components are properly placed.

79 Error Message 

A fault with the network print server that services the printer. While troubleshooting 79 errors, ensure there aren’t any unfinished jobs. This can be done by opening the Printer folder from the Print server’s start menu to find any pending jobs. A 79 error can also signal a failure of a printer add-on part, such as an MIO card or a RAM module. Remove all add-ons, then return each module to the printer one by one to see if this was the reason for the error message.

Ghosting 

Ghosting means you get a print of the image on the sheet, but you also find a lighter shade of print somewhere else. this can be due to the power supply provided to the printer. Check the power outlet by plugging in a separate printer to see whether you get consistent results. 

Ghosting can also occur when consumable printer parts are about to finish or expire. All the consumable parts of a printer are rated for a specific number of pages. Those elements must be replaced as a printer approaches that last stage, to eliminate ghosting.

There is end number of reasons that may bother your HP printer and show faults. All these can be rectified with a few DIY methods at home. check more information online to understand other minor problems associated with HP printers and how they can be rectified.

Paul Petersen